ProAc Tablette 10 Signature

21000 kr

ProAc Tablette 10 Signature – Bokhyllans bäste vän

Kategori: Etikett:

Beskrivning

Demoex

STUDIO MonitorTablette 10 Signature

Pro Ac Tablette  10 Signature

Helt underbara små gynnare som gör mixningen till en fröjd. Har du ett litet kontrollrum så passar Tablette 10 Signature perferkt. Otroligt detaljerat mellanregister och underbar topp. Kompletterar du med en matchande sub så är du hemma.

Following the successful launch of the ProAc Tablette 10 we have been developing a Tablette 10 Signature version. It has taken a great deal of time to design a new bass driver with Excel magnet system and our own solid copper phase plug. The result is a bass driver with the Tablette 10 cone material and our special copper magnet system.

During the design of the Tablette 10 the LS3/5A, along with other mini monitors, were compared to the Tablette 10 and in our opinion the Tablette 10 had lower colouration. The Tablette 10 Signature shares the attributes of the Tablette 10 but has a larger more projected mid-range giving excellent sound stage with a feeling of size which, is often missing in small loudspeakers.

A great deal of time was spent fine tuning the crossover to get the best from our new bass driver. Many months of measuring and listening were taken by Stewart Tyler, the designer of both Tablette 10 and Tablette 10 Signature. The end result is a speaker similar to the Tablette 10 in sound but, on certain types of music and voice reproduction, advantages of the signature can be quite easily heard.

Tablette 10 Signature can be used with its back against the wall and on good quality stands.

Specifications

Nominal Impedance
10 ohms
Recommended Amplifiers
5 to 50 watts
Frequency Response
55Hz – 30kHz
Sensitivity
86 dB linear for 1 watt at 1 metre
Bass/Midrange
ProAc 5 inch with Paganni Mika cone, with acoustic coating and copper excel magnet system with solid copper phase plug.
Tweeter
1 inch (25mm) ProAc silk dome air cooled and inner damping.

Crossover
Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification.
Dimensions
Height: 12″ (305mm), Width: 7″ 1/2 (191mm), Depth: 6″ 1/4 (159mm)
Weight
24lb (11kg) a pair
Mode
Stand mounting recommended. Can be shelf mounted if necessary
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple, Silk White, Natural Oak and Walnut.
Premium Finishes:
Rosewood, Ebony.

*Premium Finishes to order at extra cost*

Den ultimata monitorn för mixning av röster. BBC:s licensierad monitor speciellt anpassat för röster. Helt galet bra monitor för mixning av akustiska inspelningar typ Jazz och inspelningar med mycket högt focus på röster. Rogers är grundat år 1947 och har under åren tillverkat mer än 50000 par av studiomonitorn LS3/5a

System type: Two way infinite baffle
· Frequency response: 80Hz-20KHz +/-3dB
· Nominal Impedance: 15 Ohms
· Bass/midrange: 110mm Bextrene cone
· Tweeter: 19mm Mylar dome
· Crossover frequency: 3KHz
· Sensitivity: 82.5dB/W/M
· Finish: Walnut, Rosewood and Olive
· Grille: Black Tygan
· Dimensions: 305 x 190 x 165mm (HxWxD)
· Weight: 4.9Kg (each speaker)
· Recommended amplifier range 30-80 Watts

Pris 36500:-

The ProAc studio 100 was produced for over 20 years until 2013. They were made for both domestic and studio use. The studio 100 quickly became a favourite in studios, used as a near field monitor. For the last two years Stewart Tyler has been working  on a new speaker named the ProAc SM100 and all paraMetres have been improved for both studio and domestic use. It now has a new bass driver with a new surround and dust cap along with a brand new one inch domed tweeter and crossover network, however the cabinet remains the same. The bass driver looks similar but has a new rubber surround for longevity and power handling and now comes in a ProAc basket. The tweeter is a new ProAc design with a one inch silk dome and a front plate to lower distortion, the dome has a new roll surround. The SM100 also features a new crossover, the overall sound quality is similar to the studio 100 but a slightly smoother sound makes it ideal for long listening sessions.

SPECIFICATION

NOMINAL IMPEDANCE 8Ω 

RECOMMENDED AMPLIFIERS 30 – 150W 

FREQUENCY RESPONSE 35Hz – 30kHz 

SENSITIVITY 88dB linear for   1 Watt at 1 Metre 

BASS/MIDRANGE DRIVER 6.5” (165mm) treated   cone with new rubber   surround and basket 

TWEETER 1” (25mm) soft silk   dome with special   front plate and roll   surround 

CROSSOVER Finest components   on dedicated   circuit board.   Multistrand oxygen free 

  copper cable   throughout. Split for   optional Bi Wiring or Bi   Amplification 

HEIGHT 16” (406mm) WIDTH 8” (203mm) DEPTH 10” (254mm) WEIGHT 26lb (12kg) each 

MODE Stand mounted 

GRILLE Acoustically transparent 

  crimplene 

FINISH  Available in the following real wood veneers:  Black Ash and Cherry.

Leave comment

0